Rogue
Engineering E46 M3 X-Pipe
Rogue Engineering is
proud to introduce our E46 M3 X-Pipe exhaust midpipe.
A perfect compliment to our E46
M3 Rasp Pipe and El
Diablo exhaust system.
Now shipping! Limited quantities for
2008!
X Marks the Spot
We're excited to finally release information on our much anticipated
Section 2 X-Pipe for the E46 M3. Like all RE products, we
wanted to ensure that our new section 2 x-pipe was both high quality
as well as functional.
Whereas the factory section 2
utlitizes two 60mm diameter tubes, with a "H" crossover
and small resonator, the RE X-pipe maximizes gas velocity by merging
the two smaller tubes into one larger 76mm tube before splitting
back into two before the rear muffler. This efficient system
allows for gas velocity to equalize from cylinders 1-3 and 4-6,
before entering the muffler chamber. This exhaust merge
improves sound as well as gas velocity.
Look! It's magic!
As an added feature, we've incorporated an external "dump"
at the end of the X-pipe for total user controllable sound.
The optional EVC valve allows the user to control the exhaust
sound from stock (completely closed) to racebike loud (completely
open) from within the inside of the vehicle. The user has the
option of any variable position (partially open), controlling the
exhaust volume and flow. It takes less than 3 seconds to fully open to fully closed.
Rogue Engineering X-Pipe
Section 2
The RE X-Pipe is made to fit exactly like factory. Features
of RE X-pipe include:
- Weighs only 12 lbs. with
included blockoff plate (factory is 22 lbs.)
- Optional Electronic Valve
Control (EVC) valve allows for user controlled exhaust sound
levels with touch of a switch (designed to be mounted inside the
cabin, with a discreet momentary switch)
- 100% T-304 stainless steel, full TIG welded
construction.
- Includes all hardware require to
mount to aftermarket exhausts.
- Will not change
ground clearance
- Will not void
factory warranty
- Will not affect
emissions
- No permanent modifications
required for installation
EVC Kit
The optional EVC sound control kit includes the following:
- US-made EVC Valve (6061-T6 Aluminum body
and plate, stainless steel butterfly/shaft, High Temp Steel
Gears)
- Custom wiring harness,
specifically designed for internal console mounting in E46 M3.
All you need is power and ground source for wiring.
- Custom momentary rocker switch
- Hardware and gaskets for
mounting valve to RE X-Pipe.
- Stainless steel downturn exhaust
tip (diverts exhaust gases towards the ground)
- Valve carries its own warranty
from the valve manufacturer.
UPS Shipping
Because of its size, the RE X-pipe ships as an oversize item
|
