The Rogue Engineering rear ride height adjusters allow for rear height changes for 60mm/2.25" coilover style springs. These are NOT compatible with stock-style, "beehive" springs (with small pigtail ends)
Made from 6061 aluminum, it features ACME style threads, which allow for grit, grime and dirt to be easily cleaned and prevent galling.
This pair of adjusters can fit E30, E36 and E46 rear suspensions.
- 0.675" stack height, when threaded all the way down
- 1.5" of additional height, when adjusted to maximum height
- The thread tolerance "bolt" portion of the part (black) is an 8g thread while the "nut" portion of the assembly (grey) is 8G. This allows for a tolerance that is very easy to move, even while contaminants may be introduced.
- 6061-T6 ACQ aluminum, CNC'd with ACME style threads
Adjustments can be made with the pin tool (sold separately), which is conveniently the same size as an MCS spring tool. The collar is intentionally angled so that the pin holes are more easily accessed when in the lower part of the spring arm.
Sold as a pair.