A simple check to verify your current subframe is straight is to flip it upside down so all 4 points are touching the ground flat. If all four points are touching at the same time, the subframe carrier is straight. I’d you can sense any rocking movement, this indicates it has been twisted and not useable to us as a core.
The core subframes are first checked to make sure they are not tweaked (which can happen in an accident). If they are good, paint is stripped off the entire part by professionally sandblasting. When this is completed, the
Rogue Engineering subframe reinforcement kit is fitted and MIG welded in place.
Once the reinforcement is completed, the entire carrier is powdercoated in satin black for an OEM appearance.
Pickup is encouraged, but shipping is available.
Multiples usually available. Call for inventory verification.
